Hot Dipped Galvanized Iron Wire
Galvanized Wire is made to EN 10244; ASTM A 641 "Zinc and zinc/ aluminium-alloy Coatings on Steel Wire". The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for general manufacturing purposes is available in a standard galvanized coating or a heavy galvanized coating. Standard galvanized coatings are smoother, however less corrosion resistant than heavy galvanized coatings and are often used in normal wire working applications. Some typical end users include cages, bucket handles, coat hangers and baskets. Heavy galvanized coatings are used in conditions where atmospheric corrosion is severe. End users include crop support wires where chemicals are used, pool fencing or chain mesh in coastal areas.
- Product Introduction
Tianjin Huayuan Times Metal Products Co., Ltd. is one of the leading manufacturers and suppliers of hot dipped galvanized iron wire in China. If you're going to wholesale durable hot dipped galvanized iron wire made in China, welcome to get more information from our factory. Customized orders are welcome.
Diameter Range: Std. Gal. 0.15-8.00 mm
Diameter Range: Heavy Gal 0.90-8.00 mm
Surface Finish: Standard & Heavy Galvanized
Galvanised Wire Working Specifications
.
Nominal Diameter | Minimum Coating Mass (g/m2) | ||
Standard Galv. | Heavy Galv. | Extra-highGalv. | |
over 0.15mm up to and incl. 0.50mm | 15 | 30 | |
over 0.5mm up to and incl. 0.75mm | 30 | 130 | |
over 0.75mm up to and incl. 0.85mm | 25 | 130 | |
over 0.85mm up to and incl. 0.95mm | 25 | 140 | |
over 0.95mm up to and incl. 1.06mm | 25 | 150 | |
over 1.06mm up to and incl. 1.18mm | 25 | 160 | |
over 1.18mm up to and incl. 1.32mm | 30 | 170 | |
over 1.32mm up to and incl. 1.55mm | 30 | 185 | |
over 1.55mm up to and incl. 1.80mm | 35 | 200 | 480 |
over 1.80mm up to and incl. 2.24mm | 35 | 215 | 485 |
over 2.24mm up to and incl. 2.72mm | 40 | 230 | 490 |
over 2.72mm up to and incl. 3.15mm | 45 | 240 | 500 |
over 3.15mm up to and incl. 3.55mm | 50 | 250 | 520 |
over 3.55mm up to and incl. 4.25mm | 60 | 260 | 530 |
over 4.25mm up to and incl. 5.00mm | 70 | 275 | 550 |
over 5.00mm up to and incl. 8.00mm | 80 | 290 | 590 |
Diameter Properties
Standard Galvanized Wire is manufactured to comply with the following diameter tolerances:
Nominal Wire Diameter | Tolerance (mm) |
over 0.80mm up to and incl. 1.60mm over 1.60mm up to and incl. 2.50mm over 2.50mm up to and incl. 4.00mm over 4.00mm up to and incl. 6.00mm over 6.00mm up to and incl. 8.00mm | +/-0.03 +/-0.03 +/-0.03 +/-0.04 +/-0.04 |
Heavy Galvanized Wire is manufactured to comply with the following diameter tolerances:
Nominal Wire Diameter | Tolerance (mm) |
over 0.80mm up to and incl. 1.60mm over 1.60mm up to and incl. 2.50mm over 2.50mm up to and incl. 4.00mm over 4.00mm up to and incl. 5.00mm over 5.00mm up to and incl. 6.00mm over 6.00mm up to and incl. 8.00mm | +/-0.04 +/-0.04 +/-0.04 +/-0.05 +/-0.05 +/-0.05 |
Tensile Strength (Mpa)
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
Grade | Tensile Strength (Mpa) |
Galvanised - Soft Quality Galvanised - Medium Quality Galvanised - Hard Quality | 380/550 500/625 625/850 |
Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.
Steel Chemistry
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
Tensile Grade | % Carbon | % Phosphorus | % Manganese | % Silicon | % Sulphur |
Soft Medium Hard | 0.05 max 0.15-0.19 0.04-0.07 | 0.03 max 0.03 max 0.03 max | 0.05 max 0.70-0.90 0.40-0.60 | 0.12-0.18 0.14-0.24 0.12-0.22 | 0.03 max 0.03 max 0.03 max |
FAQ:
1. When can I get the quotation?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
2. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
If you need the samples, we would like to send sample from our Chinese factory or u can get the sample directly from our european agent storage.
3.Can you do the design for us?
Yes. We have a professional team having rich experience in design and manufacturing.
Hot Tags: hot dipped galvanized iron wire, China, suppliers, manufacturers, factory, customized, in stock, free sample, Galvanized Wire Used for Armouring, Guy Wire ASTM A 475, Hot Dipped Galvanized Iron Wire, Overhead Ground Wire, Submarine Galvanized Steel Wire, Znal Coating Steel Wire
